Where is your Bluetooth exchange folder to view your received Bluetooth files

When someone sends you a file through a Bluetooth device it usually gets saved to the Bluetooth exchange folder. By default the Bluetooth exchange folder is located in the Documents folder on your computer.

Here’s how to get to your Bluetooth exchange folder:

1. Go to the start menu in the bottom left corner
2. Choose your user name and thendocuments or just click straight on the documents link
3. Your Bluetooth exchange folder will be there in the documents folder

When a file has been sent to your Bluetooth exchange folder from another Bluetooth device, there will be a balloon popup in the taskbar notification area.

Read more

What is Bluetooth

No matter the commercial in recent years, it seems every product claims to be bluetooth enabled. The other day I think I heard about a loaf of bread even having bluetooth access. The question begs to be asked; exactly what is bluetooth? To many people, its sounds like something you’d get from kissing a smurf.

Bluetooth was named after King Harold Bluetooth who united Denmark, Norway, & Sweden. The bluetooth technology is a personal area network that unifies your electronic devises. Ericcson developed the technology so that a laptop, cell phone, and camera could all be connected within a small radius. The range of the network can be between 30 and 100 ft. The infrared rays also travel through walls so it doesn’t work like a TV remote where you need a fairway of clean paths just to switch the channel. Devices that are bluetooth ready prove to be a nice safety addition for hands free cell phone use while driving. Information can be shared between users within a small network. So the answer to what is bluetooth could be listed as a small personal network used for safety, communication, and device interaction.

Read more

Computer will not wake up from power saving mode sleep

When you are on your computer and walk away from it for a few minutes, on returning, it appears your computer has gone into power saving mode. In other words it has gone to sleep. This is all fine, providing you can now wake your computer from this deep power saving sleep.

Too many computer users move the mouse, tap on the keyboard, and even turn the monitor on and off, to try and wake the sleeping computer.

This Automatic Power saving mode is a great feature when it works like it was supposed to. However when you are right in the middle of writing an important document you have been working on for over two hours and haven’t had the chance to save yet, the Automatic Power saving mode can be sheer disaster.

You walk away to get a cup of coffee and come back to a blank and non responding computer. If you cannot wake the computer from this power saving sleep, than your all your hard work will be lost.

Why won’t the mouse and keyboard wake up the computer from the power saving sleep?

To use a mouse or the keyboard to wake up a computer from power saving mode, sometimes you need to enable this feature. Hopefully this is the answer to your problem because this is the easiest problem to solve.

These steps are the first to try and if this doesn’t solve your problem I will give you some extra things to try.

1. Go to the start menu.
2. Right click on My computer and choose properties from the menu that pops up.
3. System properties will open. In Windows Vista click on Advanced Settings in the right menu.
4. In both Windows XP and Vista you can go to the hardware tab.
5. Click on the Device Manager button.
6. Find your mouse in the devices list. To open sections click on the + sign next to the word. Click on the device to make it blue.
7. Then right click on it and choose properties from the menu. See the screenshot below.

1. When your mouse properties open go to the Power Management tab.
2. Put a tick in the box next to Allow this device to wake the computer.
3. Press OK. See the Screenshot below.

Extra steps to take when your computer will not wake up?

• Disable power saving mode altogether.
• Check to see if your computer has an overheating problem. If it does it will not restart until it is cooled down.
• Download all Windows Updates.
• Make sure your computer doesn’t have a under rated power supply.
• Check your hardware. Graphics cards and motherboards are common culprits for this problem.
• Clean the motherboard and other inside components of dirt and dust. Dirt causes static and static damages the board. Please see How to open a computer case safelyand How to clean inside your computer safely

Read more

How to know if you have a computer power supply problem

A computer power supply is one of the hardest working components in your computer. It supplies power to the entire computer system. When you have problems with the computer power supply, luckily most of the time it is obvious because there will be no power to your computer. Unfortunately sometimes problems can occur with the computer even though the power seems to be still running.

Here are some of the obvious computer power supply problems:

• There is a on off switch on that back of your power supply. Check to see if this is on. If you are plugged into a socket, this switch also has to be in the on position for a computer power supply to work.
• If there is another small red switch on the back of the power supply, make sure it is on the correct voltage for your country. In Australia we choose 220v and not 110v. If you try to start your computer with the switch set to 220V in a country using 110V, your computer will not power up. You can change this voltage and then try again. It should work then. If you try to start a computer when switched to 110V in a 220V country, you will probably blow a fuse in the supply or maybe damage other components in your computer.
• Has someone been working on the inside of your computer case. Maybe the computer power supply is not even connected to the mother board. So even though you have plugged the computer in you will not hear the computer running because it is not connected to it.
• Can you smell something burning or even see smoke. This is a sure sign that the computer power supply has blown up. Especially if you here a big bang and maybe it cuts the power in your house. Unplug the computer as it could damage other components.

Computer power supplies prices

Of course all technology is always getting cheaper, however a power supply can still be expensive when buying it by itself. If you buy a computer case with a power supply included it always works out cheaper. Prices vary depending on what rating you are looking for.

What to look for when buying a computer power supply?

You should replace your computer power supply with a similar one you have removed from the computer. If you have taken a 600W power supply from your computer then rep

lace it with the same. Do not put a lesser wattage into your computer. The absolute best thing to do is take the old power supply to the shop when you are buying a new one. This way you can make sure you get enough power connections coming from the power supply. Also sometimes you will need sata power connections whilst others have the older type.

What is a computer power supplies rating?

This is a rating that shows how powerful the computer supply is. If you have a 600w power supply that is its rating. To calculate what your computer power supply rating your pc needs check out the Power Supply Calculator.

Should you buy the best computer power supply or the cheapest? 

Its the same old rule for everything you buy. What you get is what you pay for. I have seen computers work faster and more efficient with a higher rated power supply. Don’t get me wrong though, because you can get a cheap power supply that is a good quality one at a bargain price. The power supply is the most important part of your computer as it is running the entire system. You can have all the super parts inside your computer but if you do not have the right power supply to run it then you are wasting your time and money.

Read more

I get an error that says, “not enough server storage is available to process this command.”

Here is a question: I have two systems networked to share internet connection thru a residential gateway (router). I’m trying to get them to file share but it never works. I look in my workgroup and I see both systems listed, I have the files/folders I want to share enabled, they even show up, but I’m unable to access them. I get an error that says, “not enough server storage is available to process this command.”

My system one is XPpro64-bit, the 2nd is XPpro, both NFTS file system. The router is Netgear WGT624, I tried enabling UPnP, and that seemed to get me a bit closer. It showed my system on a “local network,” but not both systems. I’m wondering if it’s the routers firewall preventing file sharing. I checked and really there is that SPI firewall, but I don’t want to disable that.

I tried creating a network drive and that didn’t work either. Any ideas?

When you try to access shared files and folders on some Windows operating systems, you sometimes get the following error message: “Not enough server storage is available to process this command.” This can sometimes mean that the IRPStackSize is not present in the Registry or if it does exist, the default value may not be large enough for the server service to administer shared folders on some of the physical drives.

To solve this annoying error you will need to open the Registry and navigate through it. You will have to edit settings in the registry, which can be dangerous if you do not know what you are doing. Altering the Windows registry on your computer is a touchy subject as one wrong move can crash your computer and make it unusable. You can get a pro to do it for you or you can be a daredevil and do it yourself. Just remember that there 

How to add IRPStackSize to your Windows registry if it does not exist:

1. Go to the Start menu at the bottom of the screen.
2. Choose  Run from the menu. If it isn’t there press the WINKEY and the letter R on the keyboard.
3. Type regedit and then click OK.
4. Navigate to the following registry key by clicking on the small arrows to expand the folders.
   HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services
   \LanmanServer\Parameters

1. When you reach the Parameters folder select it by making it blue. Then you will see a list appear in the right pane.
2. If you do not see  IRPStackSize mentioned there, then we have to add it. See below.

1. To add it, right click on the Parameters folder and a menu will appear.
2. Choose new, then choose DWORD (32 bit) value from the menu.
3. A new value will appear in the list. Name it IRPStackSize exactly how you see it here.

1. Double click on the IRPStackSize entry to enter a data value.
2. Enter the default value which is 15 in decimal base. See the screenshot further down.
3. Close the Registry Editor.
4. Restart the computer.

How to change the IRPStackSize DWORD value in your Windows Registry:

If you already have the IRPStackSize in your registry then you might just need to change the value data for this. Navigate to the correct area as shown in the tutorial above. When you double click on the IRPStackSize entry you will come up with a edit dword box as shown below. Obviously 15 is not working for me so I might change it to 18.

Then when I restarted the computer I will go back and see if I can share the same files and access them. If the errors still persists then go back and try changing it again. It is recommended by Microsoft that the IRPStackSize value be increased in increments of 3.

Which computer should I increase the IRPStackSize on?

Just say you are trying to access a shared file and the computer you are on comes up with this error message “Not enough server storage is available to process this command”. This means that you have to change the IRPStackSize on the other computer. Not the one you are getting the error on. Its the computer that holds the shared files that you were trying to access that has the problem. So go to this computer and fix the error.

Read more

Using Windows Remote Assistance To Get Computer Help

If you are really stuck with a problem on your computer and you know a friend that might be able to help, here is an easy way to allow them to access your computer. Even if they are half way across the world, if they have an internet connection and have sent you an invitation, then accessing your computer is entirely possible. It is always good to know who you are letting into your computer because they will be able to access your files and browse around your computer.

What you need to use Windows Remote Assistance?

1. Both computers need an internet connection.
2. An invitation file needs to be sent to the helpers email address.

How to invite a friend to help through remote assistance?

1.  Go to the start menu. Choose Help and Support.

2.  The Windows Help and Support dialog box will appear. Click on the link that saysUse Windows Remote Assistance to get help from a friend or offer help.

3.  Now to invite someone to help you, click on the Invite someone you trust to help you.

4.  If you were Offering help to someone click on the button below.

5.  The Windows Remote Assistance windows will appear. Press on use email to send an invitation.

6.  You will need to enter a password. Remember this as you will need to give it to the person helping you.

7.  Press next.

8.  If you have Windows mail, Outlook, or even Thunderbird email it will open with thepre-filled details.

9.   Enter the email address of  who you want to send this invitation to.

10.  Then type in the password you created.

11.  Send the invitation to the Email recipient.

To take up this invitation the person who receives the email will need to save the attachment that came with it to their computer. Then they will need to follow the steps above, however they must choose to offer help to someone instead of asking for help.

Read more

My Computer Boots Up To A Black Screen With A Flashing Cursor

Amazingly, when it comes to computer errors, getting a black screen with a flashing cursor is far better than just a plain old black screen. We have to look on the bright side here and presume that the fact that you can see a flashing cursor is a good sign. At least we can treat this as a bit of clue on what to try when troubleshooting this black screen.

When the average computer user sees a black screen on their computer monitor panic immediately sets in. Both black screens and blues screens are known disasters that are dreaded by most. But as I said, seeing a black screen with a flashing cursor is not that bad.

Please note that this particular error has stopped your computer from entering Windows. It is not a black screen with a movable mouse cursor on the screen it is ablack screen with a flashing cursor that has not entered Windows yet. If this error does not suit your symptoms please see My computer has a black screen and will not boot for more information.

What causes a black screen with a flashing cursor on a computer?

There are many possible causes for a black screen with a flashing cursor and I will try to mention as many as possible. Some causes of a black screen are incorrect shutdown of your computer, not waking from sleep mode, not knowing where to boot to, corrupt software, damaged start up, and the list goes on.

The last sleep transition was unsuccessful:

This is one that I have had a lot of experience with.  People have the Windows sleep mode enabled on their computer and after to going to sleep, the computer does not wake up. This sounds crazy, I know. I have written an article on The computer will not wake up from powering saving sleep mode.

When your computer will not wake up try starting your computer in safe mode. Simply start your computer and hit either the F2, Del, or sometimes the F10 key on the keyboard. When you enter Safe mode you should then shut your computer down correctly. A clean shut down. This should wake up the computer. Then you should disable the power saving mode as soon as you can because it will most likely do it again next time. To adjust your power saving sleep mode go to the control panel, then choose the power options icon.

Why doesn’t the mouse and keyboard wake up the computer. Please see this The computer will not wake up from powering saving sleep mode.

A device connected to the computer can cause a black screen with a flashing cursor:

Did you leave a USB flash drive connected to your computer or maybe an external hard drive? Either way, the computer might be trying to boot to this device but it is not a bootable device. Remove all devices and try to start your computer again.

Another cause could be that you have a faulty device such as a DVD drive or CD drive. The computer is trying to find all devices connected to the computer and comes across a problem device. This often causes a black screen with a flashing cursor. If you disconnect the faulty DVD drive your computer can start without errors. People are often aware of a faulty DVD drive because you might have had previous problems removing discs or opening the contents of a disc.

When you see a black screen with a flashing cursor you can almost come to the conclusion that your actual computer is fine because it is still running but just not loading into Windows. As we have seen, there are a number of causes which also equally creates a number of solutions.

Your boot options have mysteriously changed:

It’s probably not a mystery, however for some reason your computer is trying to boot to other devices and not your hard drive. You can restart your computer and get into your bios to change these settings. Here’s how to get into your bios and change settings. When you are in your bios, change the boot order or boot priority to the first being the hard drive. Exit and save your settings.

This error can happen when the computer is not shut down correctly or you have another device plugged in.

You recently installed new software, updates, or drivers:

Getting a black screen with a flashing cursor is very common after installing new software, downloading updates, or even installing new drivers and devices. If this happens and you have either Windows Vista or Windows seven, your first port of call would be to insert the operating system disc. Although Windows xp is a bit more difficult to deal with, both Windows seven and Vista will repair most problems for you. This is why you should try this method first.

This can happen after installing almost any piece of software including Windows updates, believe it or not! The problem is, if there are two programs clashing, there is not much you can do to stop this..One has to go. For this reason, when installing absolutely anything on your computer, including a simple toolbar, I recommend you create a restore point for safety reasons. Imagine if everyone actually stuck to that rule???

Anyway, if you see that flashing cursor you are almost guaranteed that your computer will boot from a CD or DVD. After all it is looking for something to boot to. Of course at this stage, when you see the flashing cursor, it is too late to insert the CD, and it is too early for other remedies.

When you insert your operating CD you must restart your computer. See the following instructions.

Restore your Windows 7 computer after having a black screen with a flashing cursor?

If you get the black screen of death using Windows 7 you can always try to recover a working system by using your Operating system disc!

1. Boot from the Windows 7 operating system disc. If your computer is not set to boot from cdrom first then you need to be able to enter the BIOS to change your boot options.

2. Choose your language from the list.

3. Choose the Repair your computer option on the install now section.

4. Choose the System restore option.

5. Choose  a restore point. If you have installed a program today that caused a problem choose a restore point prior to that?

6. Let it take you back to when you didn’t have a problem.

These instructions above will work for Windows Vista as well.

Also see this article on How to repair Windows XP without formatting.

Notes on having a black screen with a flashing cursor:

• This black screen tutorial has been split up into separate sections as people are getting confused with what to try for their actual problem.
• This tutorial is not about a black screen with a movable mouse cursor on the screen it is about a black screen with a flashing cursor that has not entered Windows yet.

More options when dealing with a black screen:

Buy the Ebook “Recover Your Computer From a Black Screen”

Let us know about your black screen with a flashing cursor experiences below as there are many more causes and solutions to learn from.

Read more

Got the Fiverr – Get computer help for $5

What is Fiverr you say? It is a website where people advertise jobs that they can do for $5. Everything costs $5. I am not sure why the website is not called the $5 site? Anyway, there are thousands of jobs advertised , including people offering computer help. There are ads for getting rid of viruses, fixing a computer problem, even doing a system restore. Sounds too good to be true you say? Ah, this is what I thought.

Should you really be giving a complete stranger access to your computer, to roam around freely, and search and destroy your problem? This is what happens if you were to employ someone remotely to fix your computer. You must let them in via your internet connection, behind your protection, and basically into your home.They could copy your files, delete files, or even worse, crash your computer.

How does Fiverr work?

To do anything on Fiverr you will have to register, which by the way is the easiest process I have seen.

If you want to find someone to do a particular job for you then you can easily type your keyword into the search in the right sidebar.

1. For example I would type in “website link“.
2. When I find someone I like I can press on the order now button.
3. You can also click on Contact Seller before buying to ask questions.

If you want to offer your services you can simple fill in the sentence at the top of the homepage that says “I will……….for $5″ and then press continue.

It is all very basic and easy to use.

What type of jobs can you get done on Fiverr?

You can get almost anything you imagine done for you on Fiverr, but within reason of course. You can’t get someone to take your granny to the shops for the afternoon but you can get someone to sack one of your annoying employees by email or over the phone. Yes this is true..There are totally normal job posts there and others that make you wonder, “Who in their right mind would want that?” I mean seriously, would you want to pay $5 to yell at someone for half an hour or hug 10 people on the street and send you proof?

Here is a list of cool, useful jobs you can get done for you on Fiverr:

1. Get a business logo designed.
2. Get someone to research something for you.
3. Get a photo edited to make you look like a gangster or an avatar character.
4. Get cheap advertising on other websites.
5. Get graphics made for you.
6. Get a poem or story written for you.
7. Get a song written or sung for you.
8. Setup a WordPress website.
9. Edit html code for you.
10. And more…

http://www.fiverr.com/

Jobs I do not recommend getting done:

1. Virus removal. (If you know the company then that is fine)
2. Computer help, giving access to your private computer.
3. Youtube views on videos. (fake people watching your videos)
4. Gaining Twitter followers. (fake people following you)

When Is it OK to get computer help on Fiverr and give access to your computer?

Its not really ok to do this, however there are special circumstances to consider. The person offering this service might have hundred’s of previous customers feedback that are almost impossible to fake.. The feeback is located uder the job description. It looks a bit like comments on a blog. If there are no comments there it means they have not done this job for anyone yet.

Read more